|
Filter Line Noise for A10 and X10 Devices
|
|
|
ACT AF310 120-277 VAC Two Wire Low Pass Filter
|
|
| ACT AF310 120-277 VAC Two Wire Low Pass Filter |
|
Item# 22014
|
1 customer rating
|
Price: Normally $35.00
Hot Deal $28.97
|
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Filter noise above or below 120kHz
- 120-277VAC at 60Hz
Essential Info
In certain Powerline Control Components (PCC) applications it may be possible for an electrical appliance to generate electrical interference. This random electrical interference may interfere with the PCC command signal transmission. The AF310 is a Line Noise Attenuator which is parallel tuned and, therefore, attenuates noise and unwanted signals of frequencies above or below 120 kHz without attenuating the PCC signal. It attenuates spikes and transients having rise times which are too fast to be affected by conventional spike suppressors. The AF310 Filter is useful when you are not sure what is the cause of line noise. When installed in a junction box near the breaker panel it will clean up general noise above or below 120 kHz. Note: The AF310 can sometimes attenuate the A10 or X10 signal that travels at 120 kHz as well as the noise so it is typically better to find the cause of the noise and use an AF120 15-Amp Plug-In Noise Filter or AF300 20-Amp Low-Pass Filter.
Important notes:
- Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
- Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.
Manuals/Software
What's Included
1x - AF310 120-277 VAC Two Wire Low Pass Filter
1x - Instruction Sheet
|
More Info
|
Powerline Control Components (PCC) are electronic controls designed for industrial and commercial installations. They can be used to provide centralized, automatic remote control of electrical loads by employing a power line carrier signal superimposed upon existing AC power lines supplying the loads. This concept offers a considerable saving in installation cost. Installed PCC components can be operated by utilizing the programming capabilities of a microcomputer which can control 256 separate addresses; each address switches up to 50 receiver modules and their respective loads as a group. With either the microcomputer or programmable controller, manual override can be exercised without affecting programmed memory. Wall mounted manual controllers for localized area control are also available.
The PCC devices are compatible with the various distribution system voltage levels, either single or three-phase AC, that are normally encountered in industrial and commercial applications. PCC devices can be used to implement a spectrum of control strategies enabling time of day switching, duty cycling, and demand limiting to be programmed, and resulting in man-hour savings by relieving personnel from routine, manual switching operations.
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|