• Two and eight button models
• Two way powerline communication, receives status confirmation
• Advanced A10 circuitry, X-10 signal compatible
• Easy push button programming
• Washable membrane keypads, available in white or ivory

These A10 wall mounted transmitters, available in both 2-button and 8-button models, allow you to contol lighting in up to 8 different rooms with the single push of a button. All models are available in ivory and white to elegantly match your homes decor. All models are A10 enhanced powerline carrier wall mounted transmitters. The LED on the keypad is used for a guide in programming as well as indicating status. This series of wall transmitters is programmable to any of the 256 X-10 addresses.

Compatible With X10 Powerline Protocols
These A10 wall mounted transmitters utilize advanced A10 circuitry. What is A10? A10 provides all the standard X10 functionality you've come to know (and is fully compatible with X10 devices). But when used with other A10 devices, A10 technology provides advanced features such as improved signal sensitivity and management, extended addressing (up to 4096 unique addresses), customizable device behavior and more. Click the "What Is A10?" link to the above-right for a detailed overview of A10 technology.

Easy Push Button Programming
Programming is simple for the 2 button units (Ivory #22002AI & White #22002AW)* for unit address and for:

• Response to "all lights on" command
  
• Response to "all lights off" command
  
• Response to "all units on" command
  
• Response to "all units off" command
  
• Response to "status request"
  
• Enabling or disabling "polite mode"

*Decorator wall plate not included. Choose from some of the following Decora style trim plates.

Easy Tap Button Programming
Programming is simple for the 2 button tap units (Ivory #22003AI & White #22003AW)* for unit address and for:

• Top (On) button:
  
  • One tap — transmits on command preceded by its address
    
  • Two taps — transmits an on command preceded twice by its address
    
  • Three taps — transmits all lights on command
    
  • Push hold — transmits bright commands, preceded once by its address until released
  
  
• Bottom (Off) button:
  
  • One tap — transmits off command preceded by its address
    
  • Two taps — transmits an off command preceded twice by its address
    
  • Three taps — transmits all units off command
    
  • Push hold — transmits dim commands, preceded once by its address until released

*Decorator wall plate not included. Choose from some of the following Decora style trim plates.

Additional Programming For 8 Button Models*
The 8-button model has the ability to be easily configured using the keypad buttons for operation in five different ways and will accept a paper insert (provided) behind the keys allowing the user to easily identify and label each button with the load it controls.

• Eight button on/off (each button - push on, push off)
  
• Four buttons on, four buttons off
  
• Three buttons on, three buttons off plus all lights on and all lights off on bottom buttons
  
• Three buttons on, three buttons off plus all lights on and all units off on bottom buttons
  
• Three buttons on, three buttons off plus bright and dim on bottom buttons

*Decorator wall plate not included. Choose from some of the following Decora style trim plates.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.