• Use with Mark 10 Powerline, AmbiStar, and Tu-wire dimmable fluorescent ballasts
• Fits any standard decora style wall plate
• Non-volatile memory retains settings through power outages
• Built-in filter for Radio Frequency Interference (RFI)
• Digital soft-On/fade-Off extends the life of your bulb or lamp
• Easy to use 10-second delay feature
• Push pad for On/Off control, separate slider control for dim/bright
• Use up to 5 accessory dimmers (sold separately) with 1 Master

ACCELL Smart Dimmers provide accurate, full-range, digital dimming for fluorescent loads. Cooper Wiring Devices offer beautiful contemporary styling through the ACCELL product line, with aesthetics which match all standard decora style wall plates. This standard sizing makes it easy to replace your existing switch. Master ACCELL Smart Dimmers require a neutral wire for operation and are capable of being used as either a single-pole switch or as a multi-location switch, suitable for 3-way applications. Control of the wired load will be done through the electro-mechanical push pad and slider bar located to the side of the push pad. The push pad's actuation is very crisp, with minimal travel to help prevent the On/Off operation from being damaged by over use. The slider bar is used for the Dim/Bright functions provided by this switch. A green LED bar, located on the push pad, is provided for a visual indication of intensity for the bulb being controlled. Also provided, at the bottom of this LED bar, is an amber LED which indicates the On/Off status.

Besides the standard On/Off and Bright/Dim functions offered by this device, users have the option of presetting their favorite light level. Once this light level has been programmed into the AF10's memory, this light level will be activated whenever the On portion of the push pad is pressed. This can be very useful in areas such as, home theaters that may not ever have the need for lighting at a full intensity, or bathrooms where full intensity lighting can be irritating or even painful to the eyes first thing in the morning. Using this feature on any light in your home, to prevent full illumination, will save the user money by cutting back on energy use while still providing the necessary amount of light. A 10-second delay option can be used by simply holding the push pad for 2-seconds. This feature will be useful in locations where the exit is not near the switch, allowing you to have enough light to exit through a door or approach a set of stairs before the light turns off. This switch can handle a load of 1,000 watts and can be used in conjunction with up to 5 accessory switches (Companion switches sold separately).

This product is also available in ivory, white, light almond, brown, almond, and black.

For dimming incandescent and magnetic low voltage loads, see the AIM10-W 1,000 Watt INC/MLV Master Smart Dimmer, White.

• Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
• Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.

• Installation Guide

1x - AF10-GY ACCELL 1,000 Watt Fluorescent Master Smart Dimmer, Gray

1x - Installation Guide

Cooper Wiring Devices ACCELL 1,000 Watt INC/MLV Master Smart Dimmer, Gray	Cooper Wiring Devices Aspire RF 600W Incandescent Mlv Smart Dimmer, Alpine White	Cooper Wiring Devices Aspire RF 600W Incandescent Smart Dimmer, Alpine White	Remote Smart Dimmer - White Satin
Lutron Maestro IR Halogen/Incandescent Dimmer, White	Cooper Wiring 600W PIR Vacancy Sensor Dimmer Switch, Almond