Click for larger image and other views
- Can replace a standard wall switch controlling an incandescent or magnetic low voltage (MLV) load
- Requires manual activation to turn on the lights
- Will automatically turn off lights after a user selectable time delay
- Incorporates the ability to detect when rooms are only occupied very briefly and shortens the time delay in order to save energy
- An LED indicates the load status and provides a momentary flash to indicate that motion has been detected
The Cooper Wiring 600W PIR Vacancy Sensor Dimmer Switch uses advanced PIR technology to sense the movement of heat-emitting bodies. The Vacancy Sensor provides Manual-ON/Auto-OFF operation only (Title 24 2008 Compliant). The sensor automatically turns lights off after a space becomes vacant and a preset time delay elapses. Built-in dimmer provides preset full-range dimming of light load. A horizontal dim/bright bar with row of green LEDs provide intuitive control. Both versions provide Single-Pole (single-location) wiring and work with Incandescent and Magnetic Low-voltage lighting load types. All sensors are compatible with any decorator-style or decorator screwless wallplate.
This product is avaialble in: Almond
, Black, Gray
, Light Almond
, each sold separately.Additional Feature ListFull-range Preset dimming control provided with horizontal dim/bright bar
Digital circuitry provides aesthetically pleasing soft-ON/fade OFF that extends bulb life
Preset and light level change is easily shown with horizontal row of green LEDs
Works with popular load types: Halogen, Incandescent and Magnetic Low-Voltage
Single green LED indicates load status, provides locator light in dark and blinks to indicate motion detection
LED serves as air-gap switch disconnecting power from load, forcing an OFF condition
Push pad design provides minimal travel and crisp actuation
Replaces a standard light or fan switch
Provides 180 degree field of view and 1000 sq. ft. of major motion coverage
Selectable time delay of 5 seconds (test), 5 minutes, 15 minutes and 30 minutes for lights to remain on after room is vacated
Walk-in-delay feature allows sensor to turn lights off without time delay when motion is detected briefly in room
Vacancy Sensor meets California 2008 Title 24
Electrostatic discharge protection
No leakage to load in off mode
Uniform color matched PIR lens to device housing
Color change faceplate kits provide for a simple in field change.
Mid-Size decorator wallplate included with product
Neutral required for installation of device
The VS106D1 must be turned on manually with the ON/OFF button
Lights will turn off automatically when no motion is detected after a selectable time delay
The light level may be changed by pressing the dimmer bar - left side for dimming and right side for brightening
Green LEDs in the dimmer bar indicate the light level
Green LED's will dim when the dimmer is off
The selectable time delays are 5 seconds (Test Mode), 5 minutes, 15 minutes and 30 minutes (factory default)
When the lights have turned off due to a lack of motion, the lights will turn ON automatically if motion is detected within 10 seconds
Vacancy Sensor Dimmers:
6" pre-stripped wire leads, #16 AWG
Testing & Code Compliance
cULus Listed to UL244A & UL1472, file no. E325082
California Title 24 Compliant
Meets UL 94 requirements; V2 rated
0° C to 40° C (32° F to 104° F)
120V/AC 60Hz, 1/6 HP
Light Intensity Control
Full-range, continuously variable dimming
Smooth and continuous Square Law Dimming curve
Solid State Dimming
Meets ANSI/IEEE Std. C62.41-1980, tested to withstand voltage surges up to 6000V and current surges of up to 200A without damage
Radio Frequency Interference
Designed to reduce interference with radio, audio and video equipment
Light returns to same level prior to power interruption
Incandescent, Halogen, Magnetic Low-Voltage
Load status indicator, light level & locator
Meets UL20 & UL1472 for inclusion of visible, accessible air-gap off switch
Permanently marked on device
Top Housing: Polycarbonate
Bottom Housing: Polycarbonate
Form Factor: Decorator
1-Gang: 600W max.
2-Gang: 600W max.
3-Gang: 600W max.
1-Gang: 600VA max.
2-Gang: 600VA max.
3-Gang: 600VA max.
Only merchandise credit for defective items returned within 30 days of purchase. No other returns allowed on this item.
Manufacturer contact information: Cooper Wiring Devices, Tel: (866) 853-4293 Ext 3