Don't Forget Your Dampers – Normally-Closed or Normally-Open Models
When no power is supplied to the Normally Closed unit, the damper will be closed preventing air flow. When no power is supplied to the Normally Open unit, the damper will be open allowing airflow.
How It Works
Even if every room in your home is lit with recessed lights, chandeliers and wall sconces, chances are, you still have a table lamp or two. And that's nothing to say for all of the plug-in appliances throughout your home. Insteon Plug-in Modules let you add remote control of all of these "less sophisticated" plug-in apparati.
While our plug-in modules do feature embedded on and off buttons, you don't really want to reach behind the couch to turn on a lamp. Thanks to Insteon, you can control your connected lamps and appliances from any wall switch, keypad, sensor - or even your smartphone when used with the Insteon Hub.
You might not have thought about it, but a good deal of your plug-in appliances become quite handy when automated. Automatically control table lamps with a motion sensor, turn on a box fan when a room gets too hot, even sound a siren when a leak is detected.
No matter what you want to control, there is an Insteon Plug-in Module for your needs. Dimming, On/Off and Outdoor On/Off modules are available to control everything from lava lamps in your parlor to holiday decorations in freezing rain.
Plug-in In-Line Control
Setup of your Insteon Plug-in device couldn't be easier. All you have to do is connect your lamp or appliance's power cord to the outlet on the bottom of the Insteon module and then connect the Insteon module to a regular unswitched power outlet.
Buttons When You Need Them
If you need to turn your connected device on or off when your remote controls aren't handy, you can just tap the up or down arrows on the side. Chances are, you'll find your Insteon Wall Switch or Smartphone a better remote control, though.
Indoor On/Off Module is equipped with a special integrated relay and grounded NEMA 5-15 outlet that lets you remotely control up to 15A appliances or 1800W of incandescent lighting.
Power Supply Features a built-in auto-resetting fuse. The unit will automatically reset after a short circuit once the short has been cleared, eliminating the need to replace a fuse if the wires get shorted during installation. At 24V AC, this transformer is ideal for powering thermostats, dampers, zone controlled HVAC systems, lawn irrigation, sprinkler valves, surveillance cameras, or any other device requiring 24V AC power. The unit plugs into a standard 110/120V outlet, and a screw is provided to secure it to the outlet.
The power supplies (plugs) included with this kit are heavier than normal power plugs. If, when connected to the On/Off Module which is in turn plugged into an outlet, the power supply does not fit or causes strain on the On/Off Module consider using this short extension cord to connect the power supply to the On/Off Module.
20 Foot 2 Conductor, 22-Gauge/AWG Interconnect Wire This 20 Foot 2-Conductor/AWG 22-Gauge Interconnect Wire is ideal for connecting sensors, pool valves, electric door strikes, garage door openers and other hard wired devices or sensors to your controller. The wire is split-able and stranded with each wire has been conveniently been stripped back 1/4" one end and 1/2" on the other end.