Add $175.00 for FREE shipping

Motion, Temperature, and Luminance Sensors in a Single Unit
HomeSeer HSM100 Z-Wave Multi-Sensor
HomeSeer HSM100 Z-Wave Multi-Sensor
HomeSeer HSM100 Z-Wave Multi-Sensor
Item# 12677
Free shipping on orders over $175 - See Details


  • Three sensors in one
  • Control Z-Wave devices
  • Can trigger HomeSeer automation events
  • Battery operated

Essential Info

The HSM100 is a Z-Wave® device featuring three-sensors-in-one. It is primarily intended to be used as a motion sensor and is supported by all Z-Wave certified systems. However, HSM100 can also function as a temperature sensor and light sensor when used with any HomeSeer system. Use it to control Z-Wave devices directly or trigger HomeSeer automation events for whole house control of Z-Wave and non Z-Wave automation products.


What's Included

  • 1x - HSM100 Z-Wave Multi-Sensor

  • More Info

    Motion Sensor
    The sensitivity of the HSM100 motion sensor is fully adjustable, allowing pet owners to adjust the unit for best performance without false positives. The unit has a range of 30 feet and the sensor angle of view is 90° (horizontal). For best performance, mount the unit flush against a wall at a height of 6-8 feet. It is not necessary to point the unit downward. An exposed side-mounted button allows for easy unit testing and setup and the default setup cycle (10 mins) provides HomeSeer users and installers plenty of time to configure the unit.
    • Passive Infrared Sensor (PIR)
    • 30 ft Range
    • 90° Horizontal Angle Coverage
    • Adjustable Sensitivity (for 'pet friendly' operation)
    • Programmable Timeout (for 'no motion' detection)
    • LED Motion Indicator

    Luminance Sensor
    The illumination sensor of HSM100 can be programmed to work in tandem with HomeSeer software and controllers to ensure greater lighting accuracy under a wide variety of conditions. Use it to light rooms *before* 'sunset' on cloudy or overcast days. Use it to prevent 'on' commands when sufficient natural light is already available.
    • Detects the amount of light in the room
    • Lights stay off if there is sufficient natural light

    Temperature Sensor
    The temperature sensor of HSM100 can be used to adjust heating and cooling systems to keep the room comfortable. Use it also to monitor areas of concern where conventional thermostats are not installed.
    • 32° - 104°F (0° - 40°C) Range
    • 0.2°F Resolution

    Battery Level
    In addition to sensing motion, light and temperature, the HSM100 also monitors its own battery condition. Use this feature with HomeSeer to trigger email, phone or text to speech alerts if the battery drops below a certain (user definable) point.


    Manufacturer Product NoHSM100
    Frequency908.42 MHz Z-Wave Frequency


    12 Ratings
    5 star: 25%  (3)
    4 star: 33%  (4)
    3 star: 17%  (2)
    2 star: 8%  (1)
    1 star: 17%  (2)
    Average Customer Rating
    (12 customer ratings)
    Share your thoughts with other customers
    SCOTT -- glastonbury, CT   1/10/2013
    I have the Vera 3 monitoring a house 1 hr drive away. The unit paired easy and was working fine. It runs through batteries in 1 day to about 2 weeks. Obviously that will not work. I had to return it as defective.
    HARRY -- hillsboro, OR   7/2/2012
    Really cheap hardware inside, definitively not work the price. Using with Vera3 I had to scale the reporting to every 5 minutes because first set of batteries only lasted 3 day. Still not sure if it works as a motion sensor - light and temperature sensor work OK with 5min reporting
    JohnR -- columbia, SC   3/21/2012
    This is a solid device, however, depending on how you have poll / wake-up settings configured this depends on application, these devices will eat batteries, and I mean within weeks. The 'for a year' spec is on the outside, with only intermittent triggers I expect. In fact, you will note that 'S2s' are available on other sites that are set with 'taps' for external power supplies. Give that some thought, and by reply, encourage SmartHome to start stocking / selling those units. Converting old units for external is doable, but takes some effort.
    DARRELL -- chandler, AZ   3/2/2012
    The homeseer multi-sensor works well. First I tried pairing it with my Vera3 and it had issues updating so I paired it my older Vera2 and bridges the Vera2 to Vera3. Actually no issues with the sensor itself. Only 4 stars for battery life.
    Rich -- Maryland   7/29/2011
    Bought two to use for monitoring temperatures through out home. Found my self using them also as motion detection devices. Great products.
    Alex -- Florida   7/6/2011
    Awesome, works great!, easy to set up. I'm using it with Homeseer Pro.
    TIM -- sammamish, WA   6/27/2011
    I'm only using the temp sensor in it, but works great.

    Related Items

    Sign-up for Exclusive Email offers 
    How to Order Track Your Package Shipping Returns Contact Us Customer Service Retail Store
    Getting Started Learning Center FAQ Dealers Customer Testimonials Affiliate Program
    About Us INSTEON Press Awards Employment Guarantees Security & Privacy
    Free Catalog Email Newsletter Forum RSS Site Map
    Have questions? Call us at 800-762-7846 (Mon-Fri 5am-7pm and Sat 6am-3pm PT) or send us a message
    Place your order by 3pm PT for same day shipping
    Copyright 1995-2014 SMARTHOME™
    Verisign Secure Site PayPal Acceptance Mark