|
|
|
|
| Z-Wave 30A 120/240v Relay Contactor Module |
|
|
| Item# 119303 |
Free shipping on orders over $200 details
|
|
|
|
|
|
Overview
|
- Signals sent via RF - no new wiring needed
- Heavy duty - max 30 amps
- Works with various voltages from 110 to 277VAC
- Local control
Essential Info
Use this Z-Wave 30A Relay Contactor Module to control your air conditioner, spa, heater, or other big appliances on your Z-Wave network. Unlike other Z-Wave switches, this module uses a heavy-duty mechanical relay to turn power on and off, so it has a higher load capacity. The Z-Wave Relay Contactor Module is part of Intermatic's InTouch™ system, which uses Z-Wave wireless technology to communicate via RF for reliable and secure control. This advanced mesh communication network offers effortless programming and maintenance, and the entire system can be easily expanded to suit the growing needs of a home or business. Link devices easily using the Hand-Held Remote Controller (sold separately).
Manuals/Software
What's Included
Z-Wave 30A Relay Contactor Module
Instructions
|
More Info
|
Works on Any Standard VoltageThis Relay Contactor Module can be easily configured to operate on 110/120, 208, 240, or 277 volts AC. There are two separate normally open relays in this module, which can be configured to operate two loads independently. The voltage that operates the logic circuits can be used to power the loads, or the loads can use completely separate power.
NOTE: The contactor module must be removed from the enclosure to set the jumpers. Spread the enclosure sides apart a little to release the catches that hold the module in place. Refer to the photo below to see where the jumpers are located.
Outdoor EnclosureThe Z-Wave 30A Relay Contactor Module comes in a rainproof, lockable enclosure, so you can mount it close to your appliance.
Automate Your Entire Home with Z-Wave TechnologyAny device displaying the Z-Wave logo can be incorporated in your Z-Wave network. Since Z-Wave operates on RF frequencies and every device is a repeater, the more devices you use, the better your network functions. There is a wide variety of Z-Wave devices made by several manufacturers, and any of these can add more automatic functions to your network.
Full Line of InTouch Z-Wave Devices AvailableUSB Stick and HomeSettings Software
600w Dimmable Wall Switch
15A Relay Wall Switch
15A Receptacle
1-Scene Remote Wall Controller
Hand-Held Remote Controller
Indoor PIR Motion Sensor
|
Specifications
|
Specifications | | Manufacturer: | Intermatic | | Manufacturer Product No.: | CA3750 | | UPC: | 078275096189 | | Dimensions: | 9 ½" high x 5 ½ (6" including latch) wide x 4" deep | | Voltage: | 120, 208, 240, 277VAC 50/60Hz | | Power Capacity | 6600 Watts, 30A resistive
5500VA, 25A inductive
5540 Watts, 20A @277VAC ballast
4400 Watts, 20A tungsten
1.5HP @120VAC, 3HP @ 240VAC | | Approvals | CSA c/us, FCC | | Warranty: | 10 years, limited |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
|
|
|
|