Click for larger image and other views
|
|
|
| X10 Black & Decker Freewire Remote, Lamp Module, Receiver Kit |
|
Item# 1163
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Control two lights via radio frequency signals
- Expandable system will control any Freewire or X10 modules
- Control up to 16 modules with the included RF remote
- Use your existing X10 controllers to operate these Freewire modules
- Indoor use only
Essential Info
For an affordable, expandable, wireless automation system, try the Black & Decker Freewire™ Remote, Lamp Module, Receiver kit, which sets up in only a few minutes. Once programmed, you'll be able to turn on either of two lights with a push of a button from across the room or across your house. No rewiring is necessary: If you can plug in a lamp, you can use the Black & Decker Freewire Remote system, which will even work seamlessly with your existing X10 components. A 3V lithium battery (included) is required.
Important notes:
- Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
- Defective exchanges for identical item within 30 days of purchase. After 30 days, please contact the manufacturer.
Manuals/Software
What's Included
Messenger hub
Lamp receiver
Indoor remote
Remote holder with mounting materials
3V lithium battery installed in remote
|
More Info
|
This starter kit includes a messenger hub and an indoor remote as well as a lamp module. The messenger hub is the brain of your expandable Freewire system that doubles as a lamp module, so you'll actually be able to control two separate lamps with this starter system. The indoor lamp receiver will even accept dimming commands transmitted by a standard X10 controller.
When plugged into an AC outlet, the messenger hub has the ability to receive RF signals from the indoor remote and relays these wireless messages to any Freewire receiver dialed to the same house code. You can also add modules to operate additional indoor lights, outdoor lights, and small appliances and electronics; other than those included in this kit, additional modules are sold separately.
Control lighting and small electronics throughout your home all from the palm of your hand using the included indoor remote, which even comes with a mountable holder. The indoor remote works with all Freewire components. This remote will turn three units and two groups on and off; it will also turn all Freewire-enabled lights and appliances on and off at once. Freewire's 256 channels and 64,000 unique codes ensure a secure system for your home.
The lamp receiver provides convenient control of incandescent lamps rated up to 300 watts. Programming these units is easy. Just set your house and unit codes using the clearly marked wheels. Remember that the house code must match on all Freewire units in your home.
Do you already use X10 components for your home's automation? The Freewire system will blend in seamlessly. All Freewire plug-in modules (indoor and outdoor lamp receivers as well as the messenger hub's built-in lamp module) can be controlled by standard X10 controllers. The indoor lamp receiver will even accept dimming commands transmitted by a standard X10 controller.
The HomeLink Wireless Control System is a factory-installed feature packaged on many vehicle models, providing a convenient way to replace up to three handheld radio-frequency transmitters used to activate devices such as gate operators, garage door openers, entry door locks, security systems and home lighting. Freewire products are compatible with select 2001 and newer HomeLink-equipped vehicles. Programming instructions for HomeLink are included in the instruction guide for this Freewire product.
Also available is the Black & Decker Freewire Indoor/Outdoor Starter Kit, which contains both of these indoor lamp options as well as two outdoor lamp receivers.
|
Specifications
|
Specifications | | Manufacturer: | Black & Decker | | Manufacturer Product No.: | FW2000 | | UPC: | 028877462974 | | Dimensions: | Messenger Hub: 4 1/4" H x 2 3/4" W x 1 5/8" D; Remote: 4 1/8" H x 2 1/8" W x 9/16" D; lamp module: 2 15/16" H x 2 1/4" W x 1 9/16" D | | Power: | Messenger hub: 120V AC, 6W; lamp receiver: 120V AC, 60Hz | | Resistive Load: | 15A | | Motor Load: | 1/3 HP | | Incandescent Load: | Messenger hub: 500W; lamp receiver: 300W | | TV Load: | 400W | | Approvals: | UL listed, FCC compliant | | Warranty: | 2 years |
|
Images/Video
|
|
|
Reviews
|
|
|
Related Items
|
|
|
|
|
|