Overview

Automatically keep your home the perfect temperature
Prevent frozen pipes by turning up the heat when freezing temperatures are detected
Protect artwork, plants and pets from temperature extremes while you're away

Essential Info

Expand the power and scope of OmniLT, Omni II or OmniPro II automation controllers with the ability to detect and respond to temperature changes! Getting started is easy with the HAI complete line of temperature sensors. Use one anywhere you need to monitor or control the temperature, like attics, garages, greenhouses, basements, wine cellars, coolers or in homes with expensive artwork.

Manuals/Software

What's Included

HAI Indoor/Outdoor Temperature Sensor 31A00-1

Wall anchors

Screws

More Info

Once set up, these temperature sensors allow your Omni family automation controller to display the temperature on the console, or speak it over the telephone (if the controller employs the optional two-way voice communication feature). The controller can also report, log, alert, or generate an alarm if the temperature reaches freeze conditions or if the temperature goes above the high setpoint or drops below the low setpoint programmed in the system.

There's even a model with a built-in humidity sensor that reports outdoor or indoor relative humidity from 0 to 100 percent. High and low humidity limits can be set to prompt the Omni automation to take controller (i.e. automatically turning on the bathroom vent fan, running the air conditioner in de-humidification mode, turning on a humidifier in heating mode, etc.) or reporting high or low humidity conditions. Controlling humidity is particularly helpful in combating the growth of mold in vulnerable areas of the home, such as bathrooms, basements, attics, etc.

Constructed with highly accurate temperature sensors that don't need calibration, this temperature sensor is available for indoor/outdoor use and is coated with a sealant to withstand outdoor moisture.

Specifications

Specifications
HAI Product No.:	31A00-1
Compatibility:	OmniLT, Omni II and OmniPro II Systems
Temperature Range:	0°F - 120°F
Current Consumption:	15mA max.
Dimensions:	2 3/4" (H) x 2 3/4" (W) x 1" (D)

Please note: The HAI Omni series of products is professional grade and should only be installed by a licensed professional. All tech support inquiries and product return requests must be made by a licensed professional directly to the manufacturer at 1-800-229-7256.