|
|
|
|
| HAI UPB 2400w Dimmer - Ivory |
|
Item# 110533
|
|
|
|
|
Free shipping on orders $200 and up details
|
|
Overview
|
- Replace existing switch to add dimming and remote control to any incandescent light
- Connect to PC for easy setup and scene programming
- UPB technology offers more signal strength than X10
Essential Info
Replace an existing light switch in your home with the HAI UPB™ 2400-Watt Dimmer, and you'll not only be able to dim the light (or group of lights) and insert it into scenes, but you'll be able to control the light remotely from another room in your home. This UPB dimmer uses your home's existing wires and can control and dim lighting loads up to 2400 watts. A Decora-style wall plate is sold separately.
Important notes:
- Smarthome does not offer technical support on this product, please contact the manufacturer directly for all product support.
- Smarthome does not accept any returns for this product. If defective, you will need to contact the manufacturer directly for all warranty issues.
Manuals/Software
What's Included
Switch
4 wire nuts
Mounting hardware
Instructions
|
More Info
|
UPB ReliabilityThe HAI UPB 2400-Watt Dimmer uses Universal Powerline Bus technology for superior performance and reliability. Ideal for new or retrofit installations, no rewiring is necessary in order to use this switch; UPB switches require a connection to a neutral wire. UPB benefits include its higher reliability, since its signal strength is stronger than X10, with increased electrical noise resistance. UPB products are NOT X10 compatible.
Use Switch By Itself Or With a Separate ControllerThis HAI 2400 Watt UPB Dimmer Switch works as a stand-alone dimmer or may be used with UPB room controllers, house controllers, or automation controllers. The HAI UPB 2400-Watt Dimmer is capable of storing up to 16 preset light levels to create powerful lighting scenes.
Configure Setup and Scenes Using PC SoftwareIf you want to include fluorescent or other non-dimmable lights in scenes, you can change the function of this dimming switch to be non-dimming or vice-versa using the HAI UPB UPStart configuration software, which also allows you to change the colors on the switch's LED and the rate that it brightens to fully on or dims to fully off. In order to use these features, you'll need to install the free software on your PC and connect your PC to your power line using a UPB powerline interface module and a cable
Additional Colors AvailableThe HAI UPB 2400-Watt Dimmer is also available in white. If you'll be using UPB commands to control groups of lights with smaller loads, use the HAI UPB 1500-Watt Dimmer or HAI UPB 1000-Watt Dimmer instead.
Note on De-RatingWhen this switch is mounted in a normal depth wall box, it must be de-rated from 2400W down to 2000W. For a proper fit in a multiple-gang installation, it may be necessary to remove one or both of the break-off tabs on the sides of the 2400W switch. When tabs are removed, the overall rating of the device must be reduced. Please see the instruction manual for details.
|
Specifications
|
Specifications | | HAI Product No.: | 55A00-3IV | | UPC: | 872257002683 | | Dimensions: | 4.68" x 4.5" x 1.25" | | Weight: | 0.7 lb. | | Power Maximum: | 2400 W/2400VA | | Current Maximum: | 20A (non-dimming) | | Connections: | 12 GA | | Minimum Load: | 60 watts | | Input Power: | 120 +/- 12V AC | | Input Frequency: | 60 +/- 3 Hz | | Operating Temperature: | -40° F to 104° F | | Preset Light Levels: | 16 | | Compliance: | UL, CE, and Energy Star approved | | Warranty: | 2 years, limited |
|
Reviews
|
|
|
Accessories
|
|
|
Related Items
|
|
|
|
|
|