Add Wireless Capability to a Hard-Wired Alarm System
|
|
|
Wireless Receiver for Hard-Wired Alarm System Control Panels
|
|
| Wireless Receiver for Hard-Wired Alarm System Control Panels |
| Item# 0684 |
|
|
|
|
|
Overview
|
- Can be used with most alarm system control panels
- Supports up to 10 Powercode™ and CodeSecure™ wireless devices
- Alarm, panic or arm/disarm applications
- Provides alarm, trouble, low battery and tamper outputs
- Only recognizes devices that have been taught/learned into its non-volatile memory
Essential Info
Adding a wireless solution to a hard-wired alarm system can be achieved with this receiver from Visonic. It has a single output that can be used to communicate with most security systems and will support up to 10 wireless devices or transmitters; in particular it is designed to work with Visonic PowerCode and CodeSecure sensors for SecureLinc alarm systems. The receiver can take in signals from hand-held and portable units or window and door transmitters for alarm, emergency and arm/disarm applications. It also features low battery reporting, tamper protection, RF signal jamming and transmitter inactivity output indication. This product has professional features that are easy enough for an end user to install.
Manuals/Software
What's Included
Wireless Receiver for Hard-Wired Alarm System Control Panels
Owner's Manual
|
More Info
|
PowerCode and CodeSecure
To ensure secure communication, PowerCode devices transmit a 24-bit ID command code, which is selected from 16 million possible combinations and is therefore virtually impossible to accidentally reproduce. A smart anti-collision algorithm prevents signal jamming by simultaneous transmissions from multiple devices. When used with CodeSecure devices, the MCR-304 implements a rolling code encryption algorithm to prevent "code grabbing" by potential intruders trying to defeat the security system.
|
Specifications
|
Specifications | | General | | Manufacturer: | Visonic | | Manufacturer Product No.: | MCR-304 | | Radio Frequency (RF) | | Operating Frequency: | Per local requirements in country of use | | ID Codes: | Over 16,000,000 possible 24-bit combinations | | ID Learning Capacity: | Up to 10 different ID codes | | Total Message Length: | 36 bits (66 bits for code secure devices) | | Electrical | | Relay Outputs: | Form 1C (N.C. and N.O.) | | Connectivity: | Up to 6 adapters on a computer | | Relay Contact Ratings: | 1A resistive, 30 VDC or AC | | Status Outputs: | 3, up to 100 mA each, open-collector type | | Relay Output Modes: | Pulsed (3 s) or toggle, jumper selected | | Tamper Switch Ratings: | 0.1A / 30V DC | | Input Voltage Range: | 10.5-16 VDC (MCR-304) or 24 VAC/DC (MCR-304U) | | Current Drain @ 12V DC: | mA (standby), 32 mA (relay energized) | | Certifications: | FCC, CE | | Physical | | Operating Temperature: | 0° C to 49° C (32° F ti 120° F) | | Dimensions (H x W x D): | 110 x 63 x 25 mm (4-5/16 x 2-1/2 x 1") | | Weight: | 76 g (2.7 oz) | | | |
|
Reviews
|
|
|
Related Items
|
Customers Also Bought
|
|
|
|